RNX-OSM-CARRIER board

  • Supports Open Standard Modules (OSM)
  • Supports all sizes
  • Adapter board for easy replacement and soldering

 230

The RNX-OSM-CARRIER board provides a development environment to explore the functionality and performance of all sizes SoM with Open Standard Moduleβ„’ (OSM) form factor.

Mating Products:

RNX-i.MX93-OSM – SoM with NXP i.MX93
RNX-RZG2UL-OSM – SoM with Renesas RZ/G2UL/A3UL/FIVE

On the Carrier board, the following interfaces are available:

  • four Hirose DF040 100-pin connectors, on top of which is mounted the adapter board RNX-OSM-ADAPTER
  • 2x Ethernet 10/100/1000BaseT – RJ45
  • USB-A: USB2.0 OTG, micro AB
  • USB-B: USB2.0 Host, Type A
  • USB-C: USB3.0, Type C
  • USB-D: USB3.0, Host, Type A
  • USB debug UART_A and UART_CON, micro AB
  • micro-SD card slot
  • M.2 PCIe Connector
  • MIPI-DSI connector
  • MIPI-CSI connector
  • LVDS Display interface
  • HDMI connectors
  • RGB Parallel Display connector
  • Β Audio
    • 3.5mm jack for Headphones and Microphone
    • 1W Speakers
  • GPIO headers
  • 2x CAN Interface connectors
  • 3x PMOD connectors

πŸ“„Β RNX-OSM-CARRIER Datasheet.pdf
πŸ“„Β RNX-OSM-ADAPTER_Schematics.pdf
πŸ“„Β Gerber files for TOP stencil
πŸ“„ RNX-OSM-CARRIER – Altium complete project available upon request

Resources

Documents:
πŸ“„Β RNX-OSM-CARRIER Datasheet.pdf
πŸ“„Β RNX-OSM-ADAPTER_Schematics.pdf
πŸ“„Β Gerber files for TOP stencil
πŸ“„ RNX-OSM-CARRIER – Altium complete project available upon request

You may also like…