PM9263 - CPU Module with ATMEL AT91SAM9263

Top View Bottom View
Starter Kit is available »
Hardware features:
CPU: AT91SAM9263, 240 MHz ARM926EJ-S
64MB DRAM, 32-bit
4MB NOR Flash, 16-bit (bootable, see note)
256 MB NAND Flash (see note)
4 MB Atmel Serial DataFlash (bootable, see note)
4 MB Video Memory on a separate external bus
10/100 MBits Ethernet
Serial number chip DS2401
SODIMM200 module (67x40mm)
  Note: PEEDI can easily program NOR Flash, NAND Flash JFFS2 images and DataFlash devices using the JTAG interface
Windows CE 6.0 NEW!!!
Linux Software:
Linux Install Readme
GNU Tools (compiler, linker, debugger, etc.)
The support for PM9263 is a part of the U-BOOT mainline and the latest version can be obtained from the git repository at U-BOOT git repository
Linux Kernel including drivers for:
- NAND Flash, DataFlash
- Ethernet, Serial, USB Host, USB Slave
- LCD + Touchscreen
- Audio
KaeilOS/OpenEmbedded Distribution NEW!!!
Development tools:
Evaluation Board EB9263
PEEDI JTAG Emulator and Flash Programmer capable to program in standalone mode NOR Flash devices, NAND Flash devices with JFFS2 image or bootloader, DataFlash devices.
AT91SAM9263 Key Features:
- 240 MHz ARM926EJ-S
- DSP Instruction Extensions
- ARM Jazelle Technology
- 16 KB Data Cache
- 16 KB Instruction Cache
- Memory Management Unit
- Dual External Bus Interface
- DMA Controller
- 2D Graphic Accelerator
- CAN Interface
- AC97 Interface
- Embedded ICE
- 128 KB Internal ROM
- 96 KB Fast Internal RAM
- 324 balls LFBGA
- Low power, Vcore 1.2V
User Manual, Schematics
Linux Install Readme
Open Embedded Install Readme
Ronetix-toolset ARM
ARM Cross Development Guide
PEEDI User's Manual
Application notes
Eclipse User Guide