The i.MX7-CM is a System on Module (SoM) based on NXP i.MX7 family – a 1 GHz Dual-core ARM Cortex-A7™ processor alongside real-time 200MHz ARM Cortex™-M4 co-processor.
CPU:
- Dual-core ARM Cortex-A7 CPU, 1GHz
- ARM Cortex-M4 co-processor 200MHz
- NEON SIMD and VFPv4
Memory
- RAM: 512MiB, DDR3L (optional: up to 2 GiB)
- eMMC: 4 GiB (optional: up to 32 GiB)
- I2C EEPROM: 64KiB (optional)
- QSPI NOR Flash: 64 MiB (optional)
Display
- LVDS, up to 1400 x 1050 @60Hz
- Parallel 24-bit display interface, up to 1920 x 1080 @60Hz
Camera
Network
- Ethernet: 2x 10/100/1000Mbps
- WiFi: WL1835MOD WiLinkâ„¢ 8, 802.11b/g/n, single band combo 2×2 MIMO (optional)
- Bluetooth: Bluetooth 4.2 Secure Connection Compliant (optional)
Audio
- Audio codec WM8960: Stereo Headphone, Stereo Class D Speaker 1W, Microphone
I/O
- PCIe x1 Gen. 2.1
- 1x USB2.0 OTG port
- Up to 7x UART ports, up to 4 Mbps
- Up to 2x CAN bus
- 1x MMC/SD/SDIO
- Up to 3x SPI
- Up to 3x I2C
- Up to 4x general purpose PWM signals
- 8x general-purpose ADC channels
- 4x tamper inputs
- Up to 96x GPIO
Electrical specifications
- Supply Voltage: 3.5 – 4.5V
Physical
- Board size: 67x40mm
- SO-DIMM 204 JEDEC MO-274 module (67.6x40mm)
- Operation temperature: 0° +70°C, -40° to 85° C (optional)
- Relative humidity: 10% to 90%
- MTTF > 200000 hours
Software
🔗 Standalone U-BOOT
🔗 Standalone Linux Kernel
🔗 YOCTO
Development Tools
- Starter Kit for i.MX7-CM
- PEEDI JTAG Emulator and Flash Programmer capable to program in standalone mode NOR Flash devices, NAND Flash devices with JFFS2 image or bootloader, DataFlash devices.
